Default: [On]
• Off
• On
Sort
Begins printing from the last page when the data has been received within the memory.
Default: [Off]
• Off
• On
Number of Rings
Specifies the number of times the machine rings before it starts to receive faxes in [Switch RX
Mode] is [Auto].
Default: 3 times
• 3 to 5 times, in increments of 1
Add Footer
Sets the machine to add a footer to every fax you received.
Default: [On]
• Off
• On
Del. TX Standby File
Deletes unsent fax jobs remaining in the machine's memory.
This function is only performed when selected.
• Delete File
To delete a fax job, select the job you want to delete.
• Delete All Files
To delete all fax jobs.
Comm. Settings
ECM Transmission
Sets the machine to automatically resend parts of the data that are lost during transmission.
Default: [On]
• Off
• On
ECM Reception
Sets the machine to automatically receive parts of the data that are lost during reception.
7. Configuring the Machine Using the Control Panel
80
To Next Page
Loading...
