Print Job End Tone
Specifies the volume of the beep sound when a print job is complete.
Default: [Off]
Print Job Error Tone
Specifies the volume of the beep sound when a print job error occurs.
Default: [Middle]
Scan Job End Tone
Specifies the volume of the beep sound when a scan job is complete.
Default: [Off]
Scan Job Error Tone
Specifies the volume of the beep sound when a scan job error occurs.
Default: [Middle]
Fax TX End Tone
Specifies the volume of the beep sound when a fax transmission is complete.
Default: [Middle]
Fax TX Error Tone
Specifies the volume of the beep sound when a fax transmission error occurs.
Default: [Middle]
Fax RX End Tone
Specifies the volume of the beep sound when a fax reception is complete.
Default: [Middle]
Fax RX Error Tone
Specifies the volume of the beep sound when a fax reception error occurs.
Default: [Middle]
Set Date/Time
Set Date
Sets the date of the machine’s internal clock.
• Year: 2000 to 2099
• Month: 1 to 12
• Day: 1 to 31
Set Time
Sets the time of the machine’s internal clock.
• Hour: 0 to 23
7. Configuring the Machine Using the Control Panel
86
To Next Page
Loading...
