Ricoh Aficio SP 350SF - Specifying the Scan Settings

2. Press the [Facsimile] key.
CMF133
3. Pick up the handset of the external telephone.
4. Specify the destination using the external telephone.
5. When the other party answers, ask them to press their fax start button.
6. If you hear a high pitched tone, press the [Start] key.
CMF141
7. Press [TX], and then press the [Start] key.
8. Replace the handset.
• For details about connecting an external telephone, see p.67 "Connecting to a Telephone Line".
Specifying the Scan Settings
This section describes how to specify image density and resolution for the current scan job.
Adjusting image density
This section describes how to adjust image density for the current job.
There are three image density levels. The darker the density level, the darker the printout.
6. Using the Fax Function
222