• Depending on the [Function Priority] setting under [Admin. Tools], the [Facsimile] or [Scanner] key
may light up instead of the [Copy] key.
• The machine may make a noise while initializing. This noise does not indicate a malfunction.
• To turn off the power, turn the power switch to “
Off”.
• For details about [Function Priority], see p.298 "Administrator Settings".
Initial Setup
When you turn on the machine for the first time, a menu for configuring the settings described below will
appear on the display. This section describes how to complete the Initial Setup.
• : The fax number code is required by international law. You cannot legally connect a
fax machine to the telephone system if the fax number code is not programmed. Also, the fax
header code and the date and time of transmission must be included in the header of all pages
faxed to, from, or within the United States.
• Make sure to select the correct code for the country of use. Selecting the wrong country code may
cause failures in fax transmissions.
Display language
The language selected here is used for the display.
User fax number
The number entered here is used as the fax number of the machine. The user fax number can
contain 0 to 9, space, and "+".
User name
The name entered here is used as the name of the fax sender.
2. Getting Started
58
To Next Page
Loading...
