6. If you want to attach a fax cover sheet, click [Edit Cover Sheet] on the [Specify
Destination] tab, and then select the [Attach a Cover Sheet] check box.
Edit the cover sheet as necessary, and then click [OK].
7. Click [Send].
• A fax number can contain 0 to 9, "P" (pause), " ", " ", "-", and space.
• If necessary, insert a pause in a fax number. The machine pauses briefly before it dials the digits
following the pause. You can specify the length of the pause time in the [Pause Time] setting under
fax transmission settings.
• To use tone services on a pulse-dialing line, insert " " in a fax number. " " switches the dialing
mode from pulse to tone temporarily.
• To delete an entered destination, select the destination in the [Destination List:], and then click
[Delete from List].
• You can register the fax number you entered in the [Specify Destination] tab in the LAN-Fax
Address Book. Click [Save to Address Book] to open the dialog box for registering a destination.
• From the [View:] list, you can select the types of destinations to display.
• [All]: Displays all destinations.
• [Group]: Displays groups only.
• [User]: Displays individual destinations only.
• If sending faxes via LAN-Fax is restricted, you must enter a user code in the LAN-Fax driver's
property before sending a fax.
• If LDAP authentication is specified, you must enable user authentication and enter a user name and
password in the LAN-Fax driver's properties before sending a fax job to the machine.
• For details about configuring the transmission settings, see p.237 "Configuring Transmission
Settings".
• For details about [Pause Time], see p.267 "Fax Transmission Settings".
• For details about editing a fax cover sheet, see p.235 "Editing a Fax Cover Sheet".
• For details about entering a user code, see p.129 "When Machine Functions are Restricted".
• For details about enabling user authentication and entering a user name and password, see p.444
"When LDAP Authentication is Specified".
Canceling a fax
You can cancel sending a fax using either the machine's control panel or your computer, depending on
the status of the job.
6. Using the Fax Function
234
To Next Page
Loading...
