Auto Redial
Sets the machine to redial the fax destination automatically when the line is busy or a transmission
error occurs, if the machine is in Memory Transmission mode. The number of redial attempts is
preset to two or three times, depending on the [Country] setting under [Admin. Tools], in five-minute
intervals.
Default: [On]
• Off
• On
Print Fax Header
Sets the machine to add a header to every fax you send. The header includes the current date and
time, user fax name and fax number of the machine, job ID, and page information.
Default: [On]
• Off
• On
Original
Specifies the sides of the original (1 side or 2-sides) for scanning when using the ARDF in Memory
Transmission mode.
When scanning 2-sides of original, specify the page and binding orientations according to those of
the originals.
This setting only appears when the machine is in Memory Transmission mode for the Type 2 model.
Default: [1 Sided]
• 1 Sided
• 2 Sided Portrait: T to T
• 2 Sided Portrait: T to B
• 2 Sided Landscape: T to T
• 2 Sided Landscape: T to B
Fax Transmission Settings
269
To Next Page
Loading...
