Ricoh Aficio SP 5100N - Chapter 8 USING YOUR PRINTER with a MACINTOSH; Installing Software for Macintosh

Using Your Printer with a Macintosh
27
8 Using Your Printer with
a Macintosh
Your machine supports Macintosh systems with a built-in USB
interface or a 10/100 Base-TX network interface card. When
you print a file from a Macintosh computer, you can use the
PostScript driver by installing the PPD file.
This chapter includes:
• Installing Software for Macintosh
• Setting Up the Printer
•Printing
Installing Software for
Macintosh
The PostScript driver CD-ROM that came with your machine
provides you with the PPD file to use the PS driver, Apple
LaserWriter driver, for printing on a Macintosh computer.
1 Connect your machine to the computer using the USB
cable or the Ethernet cable.
2 Turn on your computer and the machine.
3 Insert the PostScript driver CD-ROM which came with your
machine into the CD-ROM drive.
4 Double-click the CD-ROM icon on your Macintosh
desktop.
5 Double-click the MAC_Installer folder.
6 Double-click the MAC_Printer folder.
7 For Mac OS 8.6~9.2, double-click the LBP Installer
Classic
icon.
For Mac OS 10.1 or higher, double-click the
LBP Installer
OSX
icon.
8 Click Continue .
9 Click Install .
10 After the installation is finished, click Quit .