8. Adjust the paper guides to close any gaps.
Do not move paper loaded in the tray more than a few millimeters.
Moving the loaded paper excessively can cause damage to paper edges on the openings of the
tray's lifting plate, resulting in sheets being folded or becoming jammed.
9. Lift the front side of the tray, and then slide it into the printer carefully until it stops.
To avoid paper jams, make sure the tray is securely inserted.
• When loading paper larger than A4 or 8
1
/
2
× 11 into Tray 1, extend the tray. For details, see
p.34 "Extending Tray 1".
• Before loading Postcard or 148 × 200 mm paper, straighten any curls within 2 mm (0.1 inch)
upward and 0 mm (0 inches) downward on the tray.
• Letterhead paper must be loaded in a specific orientation. For details, see p.38 "Loading
Orientation-Fixed Paper or Two-Sided Paper".
• You can load envelopes into Tray 1. Envelopes must be loaded in a specific orientation. For
details, see p.40 "Loading Envelopes".
Loading Paper into Paper Trays
33
To Next Page
Loading...
Need help?
General