15
Control Panel
The Ready screen.
When the system power is switched on the Ready
screen will be shown. Here you will nd information
showing the actual set up. From this screen you can
also access other screens, that will help you operate
the complete BK5010 Booklet making system.
arrow button
change button
tools button
jobs button
The Jobs screen.
Pressing the [Jobs] button in the Ready screen opens
the Jobs screen. From here you can load, customize
and save job settings. These procedures are described
in section 4. Jobs.
The Tools screen.
Pressing the [Tools] button in the Ready screen takes
you to the tools screen. Here you will nd all the
necessary tools for a troublefree operation. From here
you can change the display language, set units from
millimeters to inches and more. See section 3. Tools.
for how to get around in the Tools screen.
Changing settings.
To change or adjust settings; Select an item in the
Ready screen with the [arrow] button and press the
[Change] button. For example you can ne adjust the
trimming, turn off the cover feeder or set the Book
Folder to the correct mode. Explore all settings more
thoroughly in section 2. Making Booklets.
To Next Page
Loading...
