Ricoh BOOKLET MAKER BK5010 - Load Covers

6
46
Cover feeder fault codes, continues
Load covers
Code CF-501 is displayed when covers run low.
If you wish to continue production:
Load more cover sheets according to section 2. Making Booklets.
Code CF-501 will extinguish and copier will start.
If you wish to continue production, using up the cover sheets that are loaded:
Press ESC. Code CF-501 will extinguish and copier will start.
Code CF-401 is displayed when covers are empty.
If you wish to continue production:
Load more cover sheets according to section 2. Making Booklets.
If cover job is nished and you wish to run a new job without covers:
Select Cover Off in the Cover menu.
Open and Close BK5010 Top Cover.