Ricoh BOOKLET MAKER BK5010 - Begin On-line Production

2
30
Make sure that the [staple icon] is present on the copier control panel. If not, turn off the
Copier and Booklet Maker. First turn the Bookklet Maker ON and then turn the Copier
ON.
Make sure that the Booklet maker system is set according to your job specication.
Select [Paper tray] (A).
Select [Staple icon] (B).
Note
Make sure correct original orientation (C) is selected.
Select [Dup / Combine / Series] (D).
Select [Book] (E).
Select [1 Sided] (F) if your originals are only printed on one side or [2 Sided] (G) if they
are printed on both sides.
Select [Magazine] (H).
Select [Quantity] (I).
Press the Start key .
Begin On-line Production
Begin On-line Production
A. Paper tray
B. Staple icon
D. Dup. / Combine /
Series
E. Book
G. 2 Sided
F. 1 Sided H. Magazine
I. Quantity
C. Original orientation