2
28
Book Folding
General
The Book Folder has six different settings. It can be set to [Auto], [Mode 1], [Mode 2],
[Mode 3], [Mode 4] or [Off].
In [Auto] mode, the Booklet Maker detects how may sheets there are in the booklet, and
automatically set the Book Folder to the correct mode.
Note
When the Book Folder is set to [Auto] and the booklet has less than approximately 6 sheets/
booklet, the Book Folder will bypass the Square folding action, transporting the booklet out
to the Belt stacker.
Use the manual modes to override the auto function. There are four different manual modes
to select from.
Mode 1: Approximately 6 to 11 sheets. Decreased amount of square forming.
Mode 2: Approximately 12 to 16 sheets. Medium amount of square forming.
Mode 3: Approximately 17 to 23 sheets. Increased amount of square forming.
Mode 4: Approximately 24 to 30 sheets. Maximum amount of square forming.
Select [Off] to bypass the Book Folder
Setting Mode
Procedure
From the Ready screen, scroll down to BF5010 and
press the [Change] button.
Select [Auto], [Mode 1], [Mode 2], [Mode 3], [Mode
4] or [Off] with the [arrow] button and press the [OK]
button.
To Next Page
Loading...
