Ricoh BOOKLET MAKER BK5010 - What You Can Do with this Machine

5
What You Can Do With This Machine
The Booklet Maker BK5010, Trimmer TR5010, Book Folder BF5010 and Cover Feeder CF5010
forms a booklet making system that works online with the Copier.
The print-outs from the Copier are collected in the nisher and then transported into the BK5010
Booklet Maker to the staple area. From the CF5010 Cover Feeder (optional), if present, any
type of covers, colored or black and whites, can be added to the printed set. The Booklet
Maker now jogs and then staples the set. The set is then transported further to the folding
area where the set is folded into a booklet and then fed out to the belt stacker. When a larger
number of sheets are folded an effect called creeping occurs. In order to rectify creep, the
TR5010 Trimmer (optional) can be attached after the Booklet Maker. The booklets are then
transported from the Booklet Maker into the Trimmer where the trail edge will be cut off. If a
TR5010 Trimmer is installed to the BK5010 Booklet Maker, you can can attach the BF5010
Book Folder (optional). The printouts, which have been stapled, folded and trimmed will be
fed into the BF5010. The BF5010 will atten the spine of the booklet square. The booklets
will, after passing the BF5010, have the look of a perfect bound book. The booklets are then
fed out to the Belt Stacker.
To facilitate undocking, a BK5010 Rail unit (optional) can be installed under the Booklet
Maker. Undocked or off-line, the Booklet Maker can be used as a stand-alone unit for hand
feeding.
CF5010 Cover Feeder (option)TR5010 Trimmer (option)
BK5010 Booklet MakerBK5010 Rail unit(option)
BF5010 Book Folder (option)
Belt Stacker