6
The BK5010 Booklet making system is controlled from a single control panel on the Booklet
Maker. The control panel has only four buttons which will allow you to easily set up, adjust
and operate the complete system.
The buttons are multi functional, meaning that the
function of each button depends on the information
displayed.
For example: Pressing button 3 from the Ready screen
takes you to the Tools screen.
Example 2: In this screen, button 3 has no function.
Button: 1 2 3 4
Example 3: Pressing button 3 here will load the stored
Job (4).
Button: 1 2 3 4
Example 4: In this screen pressing button 3 will save
the current settings for job No 1. The asterisk on the
rst row shows that the settings for Job (1) has been
changed, but not yet saved.
Button: 1 2 3 4
To Next Page
Loading...
