Removing Misfed Paper
106
D Remove misfed paper slowly.
E Close the output cover of the fusing unit.
F Carefully close the front cover (A).
If the error message remains displayed even you have removed the misfed
paper, check the input tray for a paper misfeed.
G Pull out the paper tray, and then carefully remove any misfed paper.
H Push in the paper tray. Make sure the tray is securely inserted to avoid
paper jams.
❒ When a paper form the paper tray 3 causes a misfeed, pull out the paper
tray 1 and 2 to remove the jammed paper. Pull out the paper tray with force
if it is difficult to pull it out completely.
❒ When closing the front cover, push the upper side of the cover firmly. After
closing the cover, check that the error is cleared.
To Next Page
Loading...
Need help?
General
