88
6
Playback Menu
Flag Function Setting
Flag images for quick access during playback. Flagged images can be
displayed by pressing the Fn button.
Setting/Canceling One File at a Time
To flag or remove flag marking from the current image, select [Flag
Function Setting] in single-image playback. Flagged files are indicated
by an icon.
Note -------------------------------------------------------------------------------------
If an enlarged still image is set, the magnification ratio and magnified area are
saved and the enlarged image can be displayed as is.
Setting/Canceling Multiple Files at One Time
To flag or remove flag marking from
multiple selected images, select [Flag
Function Setting] in thumbnail view,
highlight images, and press the ADJ./OK
button to add or remove flag marking.
Press DISP. when the operation is
complete.
Flag Func. Set.
9
/
12
Caution ---------------------------------------------------------------------------------
• If the name of the file set to [Flag Function Setting] is changed using a
computer, the file is canceled from [Flag Function Setting].
• Copying images from internal memory to a memory card removes flag marking
from the images in internal memory.
• When a file in an SD memory card is set to [Flag Function Setting], [CLIPINFO]
folder and CLIP.CLI file are created on the SD memory card. If these are deleted,
the corresponding file is canceled from [Flag Function Setting].
• If the name of an image file is changed using a computer, the file may not be
able to be set to [Flag Function Setting].
• Only images taken using this camera can be set to [Flag Function Setting].
To Next Page
Loading...
