Ricoh CX4 - Protect

95
6
Playback Menu
Protect
[Protect] allows you to protect files from
being accidentally deleted.
If [1 File] is selected, you can protect or
unprotect the file selected by pressing the
ADJ./OK button NF.
If [Select All] or [Cancel All] is selected, you
can protect or unprotect all files.
Selecting Multiple Files
Select [Sel. Multiple] to change the protect status of multiple
individual files or of all files in a selected range.
To select multiple individual frames:
1
Select [Sel. Indiv.] and press the ADJ./OK button.
2
Select a frame and press the ADJ./OK button.
• Press the MENU button to switch to the display for specifying a
range of files.
• If you selected a file by mistake, you can deselect it by selecting the
file and pressing the ADJ./OK button.
• Select all files you want to protect.
3
Press the Fn button.
To select two frames and all frames between them:
1
Select [Sel. Range] and press the ADJ./OK button.
2
Select the first frame and press the ADJ./OK button.
• Press the MENU button to switch to the display for specifying files
separately.
• If you make a mistake when selecting the starting point for the range
of files, press the DISP. button to return to the screen for selecting
the starting point.