Copying
30
2
Sort
You can scan originals into memory
and automatically sort copies.
Copies are assembled as sequentially
ordered sets.
A Press the {Sort} key.
Note
When canceling the Sort func-
tion, press the {Sort} key, and
make sure the {Sort} key indica-
tor is off.
B Enter the number of copy sets us-
ing the number keys.
C Place your originals.
Note
When placing originals on the
exposure glass, start from the
first page to be copied. When
placing originals in the ADF, set
the first page on top.
D Press the {Start} key.
Note
When placing originals on the
exposure glass, press the {#}
key after all originals are
scanned.
Changing the number of sets
You can change the number of copy
sets during copying.
Note
This function can only be used
when the Sort function is selected.
A While “Copying...” is dis-
played, press the {Clear/Stop} key.
B Press [Sets].
C Enter the number of copy sets
with the number keys, and then
press [Resume].
Copying starts again.
Note
The number of sets you can en-
ter differs depending on when
the {Clear/Stop} key is pressed.
Cp
-a.eps
ABU117S
ABU
S.eps
CPY
.t
CPY
.t
CPY
.t
CPY
.t
To Next Page
Loading...
Need help?
General
