Technical Bulletin PAGE: 2/2
Reissued: 19-Jan-15
Modified Points or Symptom Corrected
1. The PS menu items "Paper Selection Method" and "Gray Reproduction" in the
Basic Settings of Printer on Web Image Monitor are not displayed.
1. Fixed: The Compulsory Security Stamp either does not print correctly or is might
be missing from printouts when printing.
2. Fixed: When printing a gzip file, print jobs might be reset. If that occurs, the
message "Compressed Data Error." will appear on the display.
Other changes
Changed: Support for AirPrint.
This firmware is dependent on the following firmware modules.
Please be sure to update all of them:
Network Support Firmware v12.27 (D1175430G) or later
PDF v1.01 (D1175436A) or later
1. The operation panel is unable to display UTF-8 characters.
2. The Scheduled Printing function (a Hold Print function) might not work with Basic
Authentication.
1. If Device Manager NX is used to backup a device that doesn't have a hard disk,
the device will stall.
2. The UTF-8 "File Names" appear garbled in the Operation Panel's "Job Operation"
or "Current Job" dialogues. If the "Details" button was pressed for one of these
jobs, an SC991 or SC997 would occur.
To Next Page
Loading...
Need help?
General
