T
echnical
B
ulletin PAGE: 1/1
Model:
GR-C1
Date:
19-Oct-12
No
.: RD117036
Subject:
Firmware Release Note: LCDC version up tool
Prepared by:
T.Kiyohara
From:
2nd Tech Service Sect., MFP/Printer Tech Service Dept.
Classification:
Troubleshooting
Mechanical
Paper path
Product Safety
Part information
Electrical
Transmit/receive
Other (Firmware)
Action required
Service manual revision
Retrofit information
Tier 2
This RTB has been issued to announce the firmware release information for the LCDC
version up tool.
LCDC version up tool 1
Version Program No. Effective Date Availability of RFU
1.18.1 D1171450 October 2012 production Available
LCDC version up tool 2
Version Program No. Effective Date Availability of RFU
1.18.2 D1171451 October 2012 production Available
Note: Definition of Availability of RFU via @Remote
“Available”: The firmware can be updated via RFU or SD card.
“Not available”: The firmware can only be updated via SD card.
Version Modified Points or Symptom Corrected
1.18.1
1.18.2
Symptom corrected:
The LCD touch screen does not turn on when the main power switch is turned on
(but machine functions work) or when the machine recovers from Energy Saver
mode (but the machine can receive/print out print jobs).
Note: See RTB #RD117035 for details.
*IMPORTANT: To apply this correction, you must install both of these firmware
versions, in this order:
LCDC version update tool #1 v1.18.1 (D1171450), and then:
LCDC version update tool #2 v1.18.2 (D1171451)
To Next Page
Loading...
Need help?
General
