Technical Bulletin PAGE: 1/1
Reissued: 13-Jan-15
RTB Reissue
The items in bold italics have been corrected or added.
Subject: Firmware Release Note: PDF
From: 1st Tech Service Sect., MFP/Printer Tech Service Dept.
Mechanical
Paper path
Product Safety
Electrical
Transmit/receive
Other (Firmware)
Service manual revision
Retrofit information
Tier 2
This RTB has been issued to announce the firmware release information for the PDF.
September 2013 production
Note: Definition of Availability of RFU via @Remote
“Available”: The firmware can be updated via RFU or SD card.
“Not available”: The firmware can only be updated via SD card.
Modified Points or Symptom Corrected
1. When printing PDF data that includes a barcode via PDF Direct Print, the
barcode lines might be printed thicker than the actual size.
(GFPR#RC14090006)
2. PDF Direct jobs containing a mask that was created using tiling, will be
reset.
3. A limitcheck error occurs if an image is too small to draw.
PDF Direct jobs containing incorrect data in cross reference section will be reset.
Symptom corrected:
- Text does not appear on the printout if the text coordinates in the PDF data are
32786 or a higher value.
- Device might stall if available memory is less than 900 KB for printing.
PDF Direct jobs will be reset as following:
- Jods created by specific application such as PDFNet.
- Jods created by specific Mac OS X application.
Printing certain web pages from Safari or PDF created by iOS/Mac OS using AirPrint
could cause the system to stall.