Technical Bulletin PAGE: 1/2
Reissued: 17-Oct-16
RTB Reissue
The items in bold italics have been corrected or added.
Subject: Firmware Release Note: FCU
From: 2nd Tech Service Sect., MFP/Printer Tech Service Dept.
Mechanical
Paper path
Product Safety
Electrical
Transmit/receive
Other (Firmware)
Service manual revision
Retrofit information
Tier 2
This RTB has been issued to announce the firmware release information for the FCU
(GWFCU3.5-5 (WW)).
Note: Definition of Availability of RFU via @Remote
“Available”: The firmware can be updated via RFU or SD card.
“Not available”: The firmware can only be updated via SD card.
Modified Points or Symptom Corrected
Added support for adhering to the Lot 6 regulation of the EU in European
devices.
Symptom Corrected:
If "Forwarding setting of Reception File Setting" is enabled and a fax received is
transferred to a folder, an error occurs and the fax is falsely deleted.
In SLNX v2.3.0 or later, the printer accounting method will be changed to match the
MFP specifications in SLNX.
This firmware is dependent on Fax firmware v09.00.00 (D1175424L) or later, so
please be sure to update it.
The display for the number of jobs (remaining) that can be sent is not reduced after a
Direct Transmission job is completed, and no Direct Transmission, Memory
Transmission, or Memory Reception jobs can be performed.