priority], deselect the [Adjust photos and images] and [Smooth low resolution images] check boxes. See
Correcting the Hue of Digital Photos and Printing Low Resolution Images Smoothly .
In the [Change User Settings] dialog box, on the [Misc.] tab, select the [Print as bitmap] check box. See
Printing a Whole Page as an Image .
● Some characters are garbled or missing.
In the [Change User Settings] dialog box, on the [Misc.] tab, select the [Change methods to extract
TrueType fonts] check box. See
Changing the Method of Extracting TrueType Fonts .
In the [Printer Configuration] dialog box, set [Spool format:] to [EMF]. In the [Change User Settings]
dialog box, on the [Misc.] tab, select the [Print as bitmap] check box. See
Printing a Whole Page as an
Image .
● Some characters are printed faintly or not printed.
In the [Print Quality] area, select [High quality] or [Standard (quality priority)], and then print. See
Printing
Using Preset Print Quality Settings .
In the [Change User Settings] dialog box, on the [Image Adjustments] tab, under [Dithering], deselect the
[Use error diffusion] check box. See
Using Error Diffusion .
● Printing is slow and takes time, which delays release of the application.
In the [Print Quality] area, select [High quality] or [Standard (quality priority)], and then print. See
Printing
Using Preset Print Quality Settings .
In the [Printer Configuration] dialog box, set [Spool format:] to [EMF].
In the [Change User Settings] dialog box, on the [Image Adjustments] tab, under [Image processing
priority], deselect the [Adjust photos and images] and [Smooth low resolution images] check boxes. See
Correcting the Hue of Digital Photos .
Close the resident application.
● Printing stops halfway.
View the status monitor to check whether an error has occurred. See
Printer Status Monitor Errors .
To print on preprinted or prepunched paper, select the [Use preprinted/prepunched paper] check box in the
[Printer Configuration] dialog box.
Top Previous Next
Copyright © 2005 All rights reserved.
file:///E|/shared/pdf-work/newfiles/pp2w/Op_Guide/int/0122.htm (2 of 2)2005/10/05 12:05:04