A cartridge replacement indicator is blinking.
(The [Power] key may be lit or blinking at the
same time.)
The corresponding print cartridge has run out
of ink.
(In the illustration, the cyan print cartridge has
run out of ink.)
Printing can continue with the ink remaining
in the printer, but there is no more ink in the
print cartridge. Check the color indicated, and
replace the corresponding print cartridge.
Cartridge End .
All the indicators are blinking.
A maintenance error has occurred.
Turn the power off, and then on.
If that does not clear the error, contact your
sales or service representative.
Where to Inquire .
The [Resume] key is lit.
(The [Power] key may be lit or blinking at the
same time.)
There may be a problem with feeding paper.
Check the printer and paper, and then press
the [Resume] key.
Paper Is Not Fed or Delivered Normally .
The paper tray may be empty.
Load the paper tray, and then press the
[Resume] key.
Loading Paper .
The [Power] key is blinking.
The printer is either warming up or receiving
print data.
(If the blinking is slow, the printer is in
standby mode with its main power off.)
If the blinking continues, the temperature
inside the printer may be outside of the
operating temperature range.
Turn the power off, move the printer to a
location where the temperature is within the
range 10-32°C (50-89.6°F), and then turn the
power on.
Out of Printable Temperature Range .
file:///E|/shared/pdf-work/newfiles/pp2w/Op_Guide/int/0143.htm (2 of 3)2005/10/05 12:05:30
To Next Page
Loading...
