Troubleshooting > Print Results Do Not Match the Displayed Image > Positions Do Not Match the Displayed Image
Positions Do Not Match the Displayed Image
If the position of printed items differs from the position of displayed items, the following questions should be
addressed.
Have the settings for page layout been made?
Check whether page layout settings have been made with the application.
Does the paper size setting match?
Make sure that the paper size selected in the [Printout paper size:] list of the printer properties dialog box matches the
size of the paper loaded.
Does the envelope selector setting match?
Set the envelope selector according to the type of paper. For envelopes, set the lever to the rear position
; for
everything else, set the lever to the forward position
. See Printing on Various Paper Types.
Have the print-heads been aligned?
When bidirectional printing is performed, and lines and characters are blurred, align the print-heads. If the problem
persists, print the nozzle check test pattern and clean the print-heads as necessary. See
Adjust Print-head Positions,
Nozzle Check, and Clean Print-heads (Normal).
Top Previous Next
Copyright © 2005 All rights reserved.
file:///E|/shared/pdf-work/newfiles/pp2w/Op_Guide/acc/0123.htm2005/10/05 12:08:28
To Next Page
Loading...
