Printing > Various Print Functions > Reducing to A3/11" × 17" Automatically
Reducing to A3/11" × 17" Automatically
Follow the procedure below to print a document larger than A3/11" × 17" onto A3/11" × 17" size paper by reducing it.
For example, if a document is A2/17" × 22" size, it can be automatically reduced to A3/11" × 17" and printed.
Open the file you want to print from the application it was created in, and then open the printer
properties dialog box.
Click the [Page Settings] tab.
Check t the document orientation and size are the same as those selected in the application.
● Normally, settings made in the application are reflected here; however, this may not be the case depending on the application used. If
necessary, make the correct settings.
In the [Printout paper size:] list, [Reduce to fit A3]/[Reduce to fit 11" × 17"] appears.
● If [Reduce to fit A3]/[Reduce to fit 11" × 17"] does not appear, select is [Auto reduce] check box, and then select [Reduce automatically
to fit A3 ( 297 × 420 mm )]/[Reduce automatically to fit 11" × 17"] in the [Auto reduce] list.
Click [OK].
Make the necessary settings, and then click [OK].
The printer properties dialog box closes.
Make print settings, and then click [OK].
● If you do not want to reduce images from documents larger than A3/11" × 17", clear the [Auto reduce] check box in the [Printer
Configuration] dialog box. This is useful if you want to print document images at full size even if they run off the paper.
● Opening from an Application
● For details about [Auto reduce], see the printer driver Help.
Top Previous Next
file:///E|/shared/pdf-work/newfiles/pp2w/Op_Guide/int/0043.htm (1 of 2)2005/10/05 12:03:33
To Next Page
Loading...
