Ricoh Mizar-PJ2 cw Series Service Training

Slide 21
Entering Service Mode
 To enter the service mode, press “Power“  “Left“ 
“Left"  "Menu".
 Note: You can use the remote controller for this.
 For the list of functions in the service mode, see ‘System
Maintenance (Test & Inspection) - Service Mode - Service
Mode Settings’ in the service manual.

Ricoh Mizar-PJ2 cw Series Specifications

General

Brand	Ricoh
Model	Mizar-PJ2 cw Series
Category	Projector
Language	English