Ricoh MP 2501SP - Page 134

Specifying a custom size paper using the control panel
1. Press the [User Tools/Counter] key.
CMR633
2.
Press [Tray Paper Settings].
3. Press [
].
4. Press [Printer Bypass Paper Size].
5. Press [Custom Size].
If a custom size is already specified, press [Change].
6. Press [Vertical].
7. Enter the vertical size using the number keys, and then press [ ].
8. Press [Horizontal].
9. Enter the horizontal size using the number keys, and then press [ ].
10. Press [OK] twice.
11. Press the [User Tools/Counter] key.
Specifying thick paper or OHP transparencies for paper type using the control panel
• Use A4 or 8
1
/
2
× 11 size OHP transparencies, and specify their size.
9. Adding Paper and Toner
132