Ricoh MP 2501SP - Loading Orientation-fixed Paper or Two-sided Paper

• Usually only one side of OHP transparencies can be used for printing. Be sure to load them with the
print side down.
• When printing onto OHP transparencies, remove printed sheets one by one.
1. Press the [User Tools/Counter] key.
CMR633
2. Press [Tray Paper Settings].
3. Press [ ].
4. Press [Printer Bypass Paper Size], and then specify the paper size.
5. Press [OK].
6. Press [Paper Type: Bypass Tray].
7. Press [Paper Type].
8. Select the paper type.
To load thick paper, press [ ], and then press [Thick Paper].
To load OHP transparencies, press [ ], and then press [OHP (Transparency)].
9. Press [OK].
When printing onto OHP transparencies, proceed to step 11.
10. When printing onto thick paper, make sure that the specified paper thickness is displayed
in [Paper Thickness].
11. Press the [User Tools/Counter] key.
Loading Paper into the Bypass Tray
133