Registering Functions in a Program
Depending on the functions, the number of programs that can be registered is different.
Standard Applications
• Copy: 25 programs
• Fax: 100 programs
• Scanner: 100 programs
Quick Applications
• Quick Copy: 25 programs
• Quick Fax: 100 programs
• Quick Scanner: 100 programs
The following settings can be registered to programs:
Standard Applications
• Copy:
Density, Reduce/Enlarge, Quantity, Paper Tray, 2 Sided, Combine, Sort, Stack, Staple,
Punch, Fold, Original Size, Original Type, Batch, Other Settings
• Fax:
Destination, Preview, Settings
• Scanner:
Destination, Preview, Send Settings
Quick Applications
• Quick Copy:
Density, Paper Tray, Quantity, Reduce/Enlarge, 2 Sided, Combine, Staple, Punch, Original
Orientation
• Quick Fax:
Destination, Line, Density, Resolution, Original Orientation, Original Sides, Scan Size,
Original Type, Preview
• Quick Scanner:
Destination, Original Type, File Type, Resolution, Original Orientation, Original Sides, Scan
Size, Preview
This section explains how to register functions to a program by using each application.
Standard Applications/Quick Applications
1. Edit the settings so all functions you want to register to a program are selected on the
[Copy], [Fax], [Scanner], [Quick Copy], [Quick Fax], or [Quick Scanner] screen.
Registering Functions in a Program
53
To Next Page
Loading...
