6. Open the subtray, and then raise the minor banner paper guide tray.
When loading paper that has a horizontal width of 148–900.0 mm (5.83–35.4 inches), proceed
to Step 7.
7. Set the leading edge of the paper according to the paper size.
When using paper that has a horizontal width of 1,200 mm (47.24 inches), curl the paper so that
its leading edge touches the minor banner paper guide tray.
When using paper that has a horizontal width of 900 mm (35.4 inches), curl the paper so that its
leading edge touches the side of the machine.
When using paper that has a horizontal width of 457.2–900 mm (18.00–35.4 inches), set the
paper so that its leading edge protrudes from the banner paper guide tray.
9. Adding Paper and Toner
158
To Next Page
Loading...
