• Various sizes of paper can be loaded in Trays 2 and 3 by adjusting the positions of side fences
and end fence. For details, see "Changing the Paper Size in Trays 2 and 3", Paper Specifications
and Adding Paper .
• You can load envelopes in Trays 2 and 3. When loading envelopes, place them in the correct
orientation. For details, see page 159 "Envelopes".
Loading Tab Stock into Trays 2 and 3
• When loading tab stock, always use the tab sheet holder.
• Load tab stock so that the side with the tab faces the tab sheet holder.
• When loading tab stock, adjust the end fence position so that the tab sheet holder will fit the tab
stock.
To Next Page
Loading...
