1. Press [Finishing].
2. Press [Finisher].
3. Select [Sort] or [Rotate Sort], and then press [OK].
4. Enter the number of copy sets using the number keys.
5. Place the originals.
To confirm the type of finishing, press the [Sample Copy] key.
6. Press the [Start] key.
Changing the Number of Sets
You can change the number of copy sets during copying.
• This function can be used only when the Sort function is selected.
1. While "Copying..." is displayed, press the [Stop] key.
3. Copy
72
To Next Page
Loading...
