Ricoh MP W6700SP User Manual

7. Enter the login user name of the destination computer, and then press [OK].
8. Press [Change] under "Login Password".
9. Enter the password of the destination computer, and then press [OK].
10. Enter the password again to confirm, and then press [OK].
11. Press [Folder].
12. Check that [SMB] is selected.
13. Press [Change] or [Browse Network], and then specify the folder.
To specify a folder, you can either enter the path manually or locate the folder by browsing the
network.
14. Press [Connection Test] to check the path is set correctly.
15. Press [Exit].
If the connection test fails, check the settings, and then try again.
16. Press [OK].
17. Press the [User Tools/Counter] key.
Locating the SMB folder manually
1. Press [Change] under "Path".
2. Enter the path where the folder is located.
For example: if the name of the destination computer is "User", and the folder name is "Share", the
path will be \\User\Share.
Basic Procedure When Using Scan to Folder
87

Ricoh MP W6700SP Specifications

General

Brand	Ricoh
Model	MP W6700SP
Category	Printer
Language	English