Why am I getting an error in the scanner of my Ricoh MP W7100 Printer?
If an error has occurred in the scanner, it means that the application-specified scan conditions have exceeded the setting range of the machine. Check whether the scanning settings made with the application exceed the setting range of the machine.
What to do if error message persists on Ricoh MP W7100 Printer after closing the cover?
If an error message is still displayed even after closing the indicated cover, it means that one or more covers that are not indicated are still open. Ensure that all the covers of the Ricoh printer are properly closed.
What to do if Ricoh Printer shows error after removing jammed paper?
If an error message continues to appear even after removing the misfed paper, it indicates that paper is still jammed in the tray. Remove the jammed paper by following the procedures displayed on the control panel.
Why is the display turned off on my Ricoh Printer?
The display is turned off because the Ricoh printer is in Sleep mode. Press the [Energy Saver] key or the [Check Status] key to exit Sleep mode.
Why does the Authentication screen appear on my Ricoh MP W7100 Printer?
This occurs because Basic Authentication, Windows Authentication or LDAP Authentication is set. Enter your login user name and user password to proceed.
What does 'Exceeded the maximum number of scan modes to save' mean on Ricoh Printer?
If the Ricoh printer has exceeded the maximum number of scan modes to save, it means that the maximum number of registrable scan modes has been exceeded. The maximum number of modes that can be stored is 100. Delete unneeded modes.
What does 'Cannot find the specified path' mean on my Ricoh MP W7100 Printer?
If the Ricoh printer cannot find the specified path, and displays a message to check the settings, it indicates that the destination computer name or folder name is invalid. Verify that the computer name and the folder name for the destination are correct.
Why can't my Ricoh MP W7100 find the specified path?
If the Ricoh printer cannot find the specified path and prompts you to check the settings, an antivirus program or a firewall might be preventing the machine from connecting to your computer. * If you are using antivirus software, add the program to the exclusion list in the application settings. * To prevent a firewall from blocking the connection, register the machine's IP address in the firewall's IP address exclusion settings.
What to do if misfeeds occur frequently on Ricoh MP W7100?
If misfeeds occur frequently, check for a foreign object on the output tray. Remove the misfed paper and do not place anything on the output tray.
Why are items missing from the User Tools menu on my Ricoh MP W7100 Printer?
If the Ricoh printer has just been turned on and the User Tools screen is displayed, but the User Tools menu has items missing, it means that functions other than the copier function are not yet ready. Wait a little longer; functions will appear in the User Tools menu when they are ready for use.
To Next Page
General