Message Cause Solution
"Exceeded Max. Pages
(Collate)"
The amount of free memory is
insufficient to perform collating.
Reduce the number of pages to
be printed or install the optional
SDRAM.
"Exceeded the maximum unit
count for Print Volume Use. The
job has been cancelled."
Printing was canceled because
the print maximum number was
reached.
For details about print volume
use limitation, see "Managing
Print Volume per User", Security.
"File system error. Cannot print
PDF file(s)."
PDF direct printing could not be
performed because the file
system could not be obtained.
Turn the machine off, and then
turn it on again. If the message
appears again, contact your
service representative.
"File system error. Cannot print
PDF file(s)."
A syntax error, etc., occurred. Check that the PDF file is valid.
"HDD is full." The hard disk became full while
printing a Sample Print, Locked
Print, Hold Print, or Stored Print
file. Delete unnecessary files
stored in the machine.
Reduce the data size of the
Sample Print, Locked Print, Hold
Print, or Stored Print file.
When printing with the
PostScript 3 printer driver, the
hard disk capacity for fonts and
forms has been exceeded.
Delete unnecessary forms or
fonts registered to the machine.
"I/O Buffer Overflow" An input buffer overflow
occurred.
• Select [Font Priority] for
[Memory Usage] in
[System].
• In [I/O Buffer] under the
[Host Interface] menu, set
the maximum buffer size to
a larger value.
• Reduce the number of files
being sent to the machine.
"Information for user
authentication is already
registered for another user."
The same account name is
already used in the newly
selected domain or server in an
environment using LDAP
Authentication or Integration
Server Authentication.
Contact your user administrator.
Alert Messages (Printed on Error Logs and Reports)
105
To Next Page
Loading...
