Safety Precautions to Be Followed
Requirements for Unpacking Products
WARNING
The following explains the warning messages on the plastic bag used in this •
product's packaging:
Do not leave the polythene materials (bags, etc.) supplied with this •
machine close to babies and small children. Suffocation can result if
polythene materials are brought into contact with the mouth or nose.
Requirements for Locating and Installing Machines
WARNING
Avoid taking the following actions close to or inside this machine because •
doing so can result in fire or electric shock:
Using flammable sprays, solvents, and so on•
Placing flammable sprays, solvents, and so on•
Placing containers holding liquids or small metal objects•
CAUTION
Do not place the machine in a humid or dusty environment. Doing so can •
result in fire or electric shock.
Do not place the machine on an unstable or tilted surface. Doing so can •
cause the machine to fall or topple over, possibly resulting in injury.
Do not obstruct the machine's vents. Doing so can result in fire as the internal •
components are overheated.
Do not place heavy objects on the machine. Doing so can cause the machine •
to fall or topple over, possibly resulting in injury.
When using this machine in a poorly ventilated or narrow room continuously •
for a long period of time or printing a high volume of materials, make sure to
ventilate the room sufficiently.
Requirements for Using Power Plugs and Cords
WARNING
Avoid taking the following actions because doing so can result in fire or •
electric shock:
Using any power supply voltage or frequencies other than those that •
match the specifications shown
Using multi-socket adaptors•
Using extension cords•
Touching the prongs of the power cable's plug with anything metallic•
Avoid applying the following actions to power cords because doing so can •
result in fire or electric shock:
Damaging them•
Bundling them•
Modifying them•
Putting heavy objects on them•
Pulling them forcibly•
Bending them forcibly•
Do not handle the power cord plug with wet hands. Doing so can result in •
electric shock.
The supplied power cord or cords are for use with this machine only. They •
cannot be used for appliances other than this machine. Also, do not use
power cords other than the power cord or cords supplied with this machine.
Doing so can result in fire or electric shock.
To prevent fire or electric shock, disconnect the plug and the power cord from •
the wall outlet at least once a year and check them. If any of the following
conditions exist, do not use the plug and the power cord continuously, and
consult your dealer or service representative.
There are burn marks on the plug•
The prongs on the plug are deformed•
The power cord's inner wires are exposed or broken•
The power cord's coating is cracked, dented, or damaged•
When the power cord is bent, the power turns off and on•
Part of the power cord becomes hot•
CAUTION
When disconnecting the power cord from the wall outlet, make sure to pull •
the plug, not the cord. Do not pull the power cord forcibly. Doing so can
damage the power cord, possibly resulting in fire or electric shock.
To Next Page
Loading...
Need help?
General
