1
27
Introduction
D3
Flicker Reduction
Cuts down on the screen flicker by setting the power
frequency.
50Hz –
Auto Power Off
Sets the time until the camera turns off automatically
if no operations are made for a certain period of time.
1min. p.36
Indicator
Lamps
Other Indicator
Lamps
Lights up the main switch lamp, self-portrait shutter button
lamp, and E lamp when the power is turned on.
High
p.10
Self-timer
Lights up the remote control receiver lamp during the
countdown for Self-timer shooting.
On
Remote Control
Lights up the remote control receiver lamp during the standby
and countdown for Remote Control shooting and after
Remote Control shooting.
On
Wi-Fi Activates the built-in Wi-Fi function. Off p.89
Reset
Resets the settings of the direct keys and for the items of the
A menu, C menu, B menu, D menu, control panel, and
playback mode palette.
––
D4
Pixel Mapping Maps out and corrects any defective pixels on the sensor. – p.119
Dust Removal Cleans the sensor by shaking it. Off p.119
Sensor Cleaning
Locks the mirror in the up position for cleaning the sensor
with a blower.
–p.120
Format Formats a memory card. – p.38
Firmware Info/Options
Displays the camera’s firmware version. You can check
the current firmware version before running an update.
––
Certification Marks
Displays the certification marks of conformance to wireless
technical standards.
–p.138
Menu Item Function Default Setting Page
KS2_OPM_EN.book Page 27 Friday, February 20, 2015 12:10 PM
To Next Page
Loading...
