To Next PageTo Next PageHow to change display language on Ricoh PJ WX4130?
If the display language on your Ricoh Projector is unknown, press the [Menu] button, and then select the display language in [XXX/Language] (XXX differs from the current display language) under [ ] tab.
What to do if my Ricoh PJ WX4130 shows no image?
If your Ricoh Projector displays no image, ensure the input signal is correctly switched if [Auto Input Search] in [Default Settings] is set to [Off]. Also, check that the mute function is not turned on and verify the [Brightness] settings in [Image Adjustment]. Confirm that your computer or AV equipment is properly connected to the projector and is functioning correctly. Finally, ensure the computer's image output is correctly switched.
Why my Ricoh Projector power does not turn on?
If the power on your Ricoh Projector does not turn on, ensure that the power plug or connector is connected correctly and that the lamp cover is mounted correctly.
How to troubleshoot no sound on Ricoh PJ WX4130?
If there is no sound from your Ricoh Projector, press the [Input] button. Ensure the mute function is not turned on and check the speaker's volume. Verify that the computer or AV equipment is correctly connected to the projector and is working properly.
Why is the image dark on my Ricoh Projector?
If the image on your Ricoh Projector is dark, check the [Brightness] and [Contrast] settings in [Image Adjustment]. Also, verify that the lamp is not near the end of its service life and check the settings of [RGB Input Range] in [Image Adjustment]. Ensure that [3D Projection] in [Default Settings] is set to [Off].
What to do if Ricoh Projector power turns off during use?
If your Ricoh Projector's power turns off during use, ensure the environment's temperature is within the acceptable range and that the vents are not blocked.
How to fix Ricoh Projector remote control that does not respond?
If the remote control for your Ricoh Projector is not responding, ensure the ID assigned to the remote control and in the settings of [Remote Control ID] in [Default Settings] are the same. Check that the batteries in the remote control are not dead and are correctly loaded. Also, make sure the remote control is within its effective range, there is nothing between it and the projector, and the remote control receiver is not exposed to strong light.
What to do if Ricoh PJ WX4130 lamp turned off or does not turn on?
If the lamp in your Ricoh Projector turned off during operation or does not turn on, it may have overheated or its service life may have expired, or the projector has malfunctioned. Disconnect the power cord, wait a while, and then turn on the projector again. If the lamp burns out, replace it with a new lamp.
What to do if Ricoh PJ WX4130 displays 'Temperature Error'?
If your Ricoh Projector displays a "Temperature Error" and turns off, it means the interior has overheated or the projector is being used in a high-temperature environment. Place the projector so that the intake and exhaust vents are not blocked. Disconnect the power cord, wait a while, and then turn on the projector again.
Why is the color faded on my Ricoh PJ WX4130?
If the color on your Ricoh Projector is faded or the tint is poor, check the settings of [Color Saturation], [R-level], [G- level], and [B-level] in [Image Adjustment]. Also, make sure the screen is clean, check the settings of [Wall Color Correction] in [Display Settings], and verify that the lamp is not near the end of its service life.
General| Resolution | 1280 x 800 (WXGA) |
|---|---|
| Screen Size | 30 - 300 inches |
| Display Technology | DLP |
| Weight | 3 kg |
| Input Terminals | HDMI, VGA, USB |
| Power Consumption | 310W (Normal mode) |
| Lamp Life | 5000 hours (Normal Mode), 8000 hours (Eco Mode) |
