Ricoh Printer - Installing Your Machine; Minimum Configuration Requirements

Paper and Other Media
19
The paper selection menu appears.
I Press the {U} or {T} key to display “Tray Paper Size”, and then press
the {# Enter} key.
The paper tray selection menu appears.
J Press the {U} or {T} key to display the target paper tray, and then press
the {# Enter} key.
K Press the {U} or {T} key to display “*Auto”, and then press the {# Enter}
key.
After about two seconds, the display returns to the menu.
L Press the {Online} key.
“Ready” appears on the display.
❒ Paper sizes not selected automatically for Tray 1 are B5K, A5K, B6K,
A6K, 8 × 13K, 8
1
/
2
× 13K, 8
1
/
4
× 13K, 16K (195 × 267)K, 4
1
/
8
× 9
1
/
2
K,
3
7
/
8
× 7
1
/
2
K, C6 Env (114 × 162)K, C5 Env (162 × 229)K, DL Env (110
× 220)K, and Custom Size.
❒ Paper sizes not selected automatically for optional paper feed unit are
B5K, A5K, B6K, 8 × 13K, 8
1
/
2
× 13K, 8
1
/
4
× 13K, 16K (195 × 267)K,
4
1
/
8
× 9
1
/
2
K, 3
7
/
8
× 7
1
/
2
K, C6 Env (114 × 162)K, C5 Env (162 × 229)K,
DL Env (110 × 220)K, and Custom Size.
Specifying custom size paper for Tray 1 and the optional paper feed unit
❒ When printing on custom size paper, specify the paper size using the control
panel or printer driver.
❒ The custom size paper selected using the printer driver overrides that select-
ed using the control panel. Do not make settings using the control panel if you
have already made settings using the printer driver. However, when printing
with a printer driver other than the RPCS printer driver, you must configure the
settings using control panel.
❒ The following is the range of paper sizes that can be loaded in each type of
the paper trays:
• Tray 1: 3.94 - 8.50 inch in width and 5.83 - 14.00 inch in length.
Tray Paper Size:
Tray 2
Tray 2:
*Auto