Fanning the paper
• If you load coated paper, label paper, or thick paper of 163.1–300.0 g/m
2
(60.1 lb. Cover–
165.0 lb. Index) in the three-tray wide LCT, it is important that you fan the sheets thoroughly.
Misfeeds may occur if paper is not fanned thoroughly.
1. Loosen the stack by riffling the sheets.
2. Holding its shorter ends, flex the stack back and forth to create space between the sheets.
Repeat this several times.
8. Adding Paper and Toner
104
To Next Page
Loading...
