Example: Scanning the document in color/duplex mode, and saving as a PDF file.
• Press [Scan Settings], [Full Color: Text / Photo] in the [Original Type] tab, and then press
[OK].
• Press [Original Feed Type], [2 Sided Original], and then press [OK].
• Press [PDF] under [Send File Type / Name], and then press [OK].
6. Specify the destination.
You can specify multiple destinations.
7. To specify the e-mail sender, press [Sender Name], and then press [OK].
8. To use Message Disposition Notification, press [Recept. Notice].
If you select [Recept. Notice], the selected e-mail sender will receive e-mail notification when the e-
mail recipient has opened the e-mail.
9. Press the [Start] key.
Registering an E-mail Destination
1. Press the [User Tools] key.
2. Press [Address Book Mangmnt].
3. Check that [Program / Change] is selected.
4. Press [New Program].
5. Press [Change] under "Name".
The name entry display appears.
6. Enter the name, and then press [OK].
7. Press [ Next].
8. Press the key for the classification you want to use under "Select Title".
The keys you can select are as follows:
• [Frequent]: Added to the page that is displayed first.
5. Scan
90
To Next Page
Loading...
