Registering Frequently Used Functions
You can use this function on Type 1, 2, or 3 machines only.
Registering Functions in a Program
Depending on the functions, the number of programs that can be registered is different.
• Copier: 50 programs
• Document Server: 25 programs
• Scanner: 25 programs
The following settings can be registered to programs:
Copier:
Original type, density, Original Size, Mixed Sizes, Batch, Original Orientation, Reverse
Orientation, paper tray, Store File (except for User Name, File Name, and Password), Auto
Reduce / Enlarge, Create Margin, Output/ Customize Function/ Finisher, Stamp (except for
Change Start No. in Stamp Text), Cover/ Slip Sheet, Edit, Dup./ Combine/ Series, Reduce/
Enlarge, number of copies
Document Server (on the initial document print screen):
Output/ Finisher, Stamp, Cover/ Slip Sheet, Edit, 2 Sided / Book, number of prints
Scanner:
Scan Settings, density, Original Feed Type, Send File Type / Name (except for Security Settings
and Start No.), Store File (except for User Name, File Name, and Password), Destinations selected
from the Address Book, Preview, Text, Subject, Security, Recept. Notice
This section explains how to register functions in a program using copier function as an example.
1. Press the [Home] key on the bottom left of the control panel, and press the [Copier] icon
on the [Home] screen.
2. Edit the copy settings so all functions you want to store in a program are selected.
2. Getting Started
38
To Next Page
Loading...
