If you are copying or printing onto side-opening envelopes in the orientation, flaps must be at the right
side of the wide LCT or multi bypass tray (Tray 7). If you are copying or printing in the orientation,
flaps must be at the bottom side of the three-tray wide LCT or multi bypass tray (Tray 7). Be sure to load
the envelopes with print side face up.
• Loading envelopes in the orientation
• Loading envelopes in the orientation
Recommended envelopes
For information about recommended envelopes, contact your local dealer.
8. Adding Paper and Toner
144
To Next Page
Loading...
