Ricoh Pro 8100S - Page 184

Messages Causes Solutions
"Cannot display preview of
this page."
The image data may have
been corrupted.
Press [Exit] to display the preview
screen without a thumbnail. If the
selected document contains several
pages, press [Switch] on the "Display
Page" area to change the page, and
then a preview of the next page will
appear.
"Cannot punch this paper
size."
The Punch function cannot
be used with paper size
selected.
Select a proper paper size. For details
about proper paper sizes, see
"Specifications for Punch Unit",
Maintenance and Specifications .
"Cannot staple paper of this
size."
The Staple function cannot
be used with paper size
selected.
Select a proper paper size. For details
about proper paper sizes, see
"Specifications for Finisher SR5050" or
"Specifications for Booklet Finisher
SR5060", Maintenance and
Specifications .
"Check paper size." An irregular paper size is
set.
If you press the [Start] key, the copy
will start using the selected paper.
"Duplex is not available with
this paper size."
A paper size not available in
Duplex mode has been
selected.
Select a proper paper size. For details
about proper paper sizes, see "Duplex
Copying", Copy/ Document Server
.
"Exceeded the maximum
number of sheets that can be
used. Copying will be
stopped."
The number of pages the
user is permitted to copy has
been exceeded.
For details about how to check the
number of copies available per user,
see Security Guide .
"Exceeded the maximum
number of multi-sheet fold.
Printing will be cancelled."
A print job was canceled
because more than the
maximum number of Multi-
sheet Fold was specified.
Specify fewer sheets for the Multi-sheet
Fold function. For details about the
maximum number of Multi-sheet Fold,
see "Specifications for Multi-Folding
Unit", Maintenance and Specifications
.
9. Troubleshooting
176