Messages Causes Solutions
"Following output tray is full.
Remove paper."
The output tray is full. • Remove paper from the
output tray to resume
printing. If paper is
destined for the finisher
shift tray, to prevent paper
from falling off the tray
press the [Stop] key to
suspend printing, and then
remove the paper. Press
[Continue] on the display
panel to resume printing.
• When using the multi-
folding unit, the number of
sheets per copy paper
stack differs depending on
the paper type and fold
type.
"Internal cooling fan is active." Large print runs will cause the
machine's interior to heat up,
triggering the cooling fan.
The fan will emit noise, but this is
normal and the machine will be
operable while the fan is
running. The amount of paper
that can be printed and the total
operation time until the fan starts
running depends on the
temperature of the location at
which the machine is installed.
"Self checking..." The machine is performing
image adjustment operations.
The machine may perform
periodic maintenance during
operations. The frequency and
duration of maintenance
depends on the humidity,
temperature, and printing
factors such as number of prints,
paper size, and paper type.
Wait for the machine to get
ready.
When Other Messages Appear
217
To Next Page
Loading...
