3. High capacity stacker
Consists of the following paper trays:
• Stacker upper tray
• Stacker tray
The stacker upper tray can hold up to 250 sheets of paper, and stacker tray can hold up to 5,000 sheets of
paper. You can connect up to two high capacity stackers.
4. Ring binder
Binds sheets of paper with a ring comb.
5. Multi-folding unit
Applies the following folds: Half Fold, Letter Fold-out, Letter Fold-in, Double Parallel Fold, Gate Fold, and Z-
fold.
6. Interposer
Inserts cover or slip sheets into copied or printed paper.
7. Perfect binder
Applies adhesive to the spine of gathered pages to bind them in a booklet.
8. Decurl unit
Flattens curls from sheets to prevent paper jams.
9. Two-tray wide LCT
Holds up to 4,800 sheets of paper. You can load paper whose sizes are up to SRA3 or 13 × 191/5. You
can connect up to two two-tray wide LCTs.
10. Bridge unit of two-tray wide LCT
Connects a two-tray wide LCT to an additional wide LCT.
11. Multi bypass attachment kit
Attaches the multi bypass tray (Tray 7) to the two-tray wide LCT.
12. Multi bypass tray (Tray 7)
Holds up to 500 sheets of paper.
13. Three-tray wide LCT
Holds up to 4,000 sheets of paper. You can load paper sizes up to SRA3 or 13 × 19
1
/
5
.
14. Finisher SR5050
Sorts, stacks, and staples multiple sheets of paper. Consists of the following paper trays:
• Finisher upper tray
• Finisher shift tray
Copies can be punched if the optional punch unit is installed on the finisher.
15. Copy connector
Allows you to use the connect copy function.
2. Getting Started
30
To Next Page
Loading...
