Ricoh PRO C7210

For details about "Print Speed setting", see "Details of Menu Items in Advanced Settings",
Adjustment Item Menu Guide.
1. In [Advanced Settings] for the custom paper you are using, select 1231: [Print
Speed], and then decrease the value in the following corresponding settings by one
step.
If the present value is [High], select [Middle]. If it is [Middle], select [Low].
• [BW/FC/FCS]
[BW/FC/FCS]
• [FCS]
[Clear/Special], [White]
• [S]
[Clear/Special], [White]
• [BW/FC/FCS: Fuser Setting HQ]
[BW/FC/FCS]
• [FCS: Fuser Setting HQ]
[Clear/Special], [White]
• [S: Fuser Setting HQ]
[Clear/Special], [White]
2. Is 1231: [Print Speed] set to [Low]?
Yes Go to the next step.
No Proceed to Step 4.
3. In [Advanced Settings] for the custom paper you are using, select 1232: [Fusing
Temperature], and then set the value in the following corresponding settings by 10.
• [BW/FC/FCS]
[Corct Temp: Pre-Feed]
• [FCS]
[Corct Temp: Pre-Fd: Clr/Sp], [Corct Temp: Pre-Fd: White]
• [S]
[Corct Temp: Pre-Fd: Clr/Sp], [Corct Temp: Pre-Fd: White]
• [BW/FC/FCS: Fuser Setting HQ]
[Corct Temp: Pre-Feed]
• [FCS: Fuser Setting HQ]
[Corct Temp: Pre-Fd: Clr/Sp], [Corct Temp: Pre-Fd: White]
Adjusting Paper Settings
23