Ricoh PRO C7210X

[Clear/Special], [White]
4. Is the setting set to [High]?
Yes Go to the next step.
No Proceed to Step 7.
5. Select 1231: [Print Speed], and then set the value in the following corresponding settings
to [Middle].
• [BW/FC/FCS]
[BW/FC/FCS]
• [FCS]
[Clear/Special], [White]
• [S]
[Clear/Special], [White]
• [BW/FC/FCS: Fuser Setting HQ]
[BW/FC/FCS]
• [FCS: Fuser Setting HQ]
[Clear/Special], [White]
• [S: Fuser Setting HQ]
[Clear/Special], [White]
6. Print 10 or more sheets. Has the problem been resolved?
Yes Finished!
No Go to the next step.
7. Select 1231: [Print Speed], and then set the value in the following corresponding settings
to [Low].
• [BW/FC/FCS]
[BW/FC/FCS]
• [FCS]
[Clear/Special], [White]
• [S]
[Clear/Special], [White]
• [BW/FC/FCS: Fuser Setting HQ]
[BW/FC/FCS]
• [FCS: Fuser Setting HQ]
7. Image Quality Problem: Full Page
190