Paper feed direction
Upward curl (radius 4 cm [1.6 in.] or less)
on the leading edge of delivered paper.
DFP800
Solution:
1. Load the paper the other way up.
2. Print the image. Has the problem been resolved?
Yes Finished!
No Go to the next step.
To follow the steps below, attach the decurler unit.
3. In the [Machine: Paper Feed/ Output] group on the [Adjustment Settings for Operators]
menu, set 0304: [Correct Output Paper Curl] to "U Curl Correction Level".
To control the level of decurling, select "Small" if the present setting is "Off" or "Large" if the present
value is "Small".
4. Print the image. Has the problem been resolved?
Yes Finished!
No Contact your service representative.
• This folding error will not occur if uncurled paper is used or sheets that curl downward.
Multi-Folding Unit
297
To Next Page
Loading...
